APARICIO BADENAS, Conrado José

cjaparicio@uic.es

Department of Odontology

SCOI - Study and Control of Oral Infections

ORCID

APARICIO BADENAS, Conrado José

CV

Teacher profile

Professor Catedràtic

Odontology, Faculty of Dentistry. Universitat Internacional de Catalunya

Academic curriculum

Ciencia de Materiales e Ingenieria Metalurgica Universitat Politècnica de Catalunya
Ingeniero Industrial Opción Materiales Universitat Politècnica de Catalunya

Research interests

Superficies e interfaces bioinspiradas para aplicaciones dentales y ortopédicas Sistemas biomoleculares de autoensamblaje para aplicaciones biomédicas Péptidos sintéticos, biopolímeros recombinantes y proteínas de la matriz extracelular Biomineralización de materiales y tejidos sintéticos Prevención y control de formación de biofilms Regeneración de tejidos duros (esmalte, dentina, hueso) Prevención y tratamiento de infecciones orales y de implantes y dispositivos transepiteliales

Education

Doctor en Enginyeria Industrial per la UNIVERSITAT POLITECNICA DE CATALUNYA

Publications

Articles

Teulé, M.; Demiquels, E.; Perez, R.; Aparicio, C.; Durán-Sindreu Terol, F; Sanchez, E.; González, J.A.; Delgado, LM, (2024), "Revision of ex vivo endodontic biofilm model using computer aided design", Journal of dentistry, vol. 149, ISSN: 0300-5712.
Dai, J.; Fischer, N.G.; Rahimi, J.; Wang, H.; Hu, C.; Chen, W.; Lin, Y.; Sang, T.; Chew, H.; Kong, L.; Aparicio, C.; Ye, Z.; Huang, S., (2024), "Interpenetrating nanofibrillar membrane of self-assembled collagen and antimicrobial peptides for enhanced bone regeneration", INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, vol. 267, No. Pt 1, ISSN: 1879-0003.
Pereira, R.; Maia, P.; Rios, J.; Herrero, M.; Rios, B.; Aparicio, C.; Gil, J., (2024), "Influence of Titanium Surface Residual Stresses on Osteoblastic Response and Bacteria Colonization", Materials, vol. 17, No. 7, ISSN: 1996-1944.
Alambiaga, A.; Chou, Y.; Moreno, D.; Aparicio, C.; López, A.; Pinheiro, V.; Tezvergil, A.; Sauro, S., (2024), "Characterisation of experimental flowable composites containing fluoride-doped calcium phosphates as promising remineralising materials: “Smart” composites doped with fluoride-doped calcium phosphate", Journal of dentistry, vol. 143, ISSN: 0300-5712.
Boda, S.K.; Willkomm, N.; Barrera, M.; Mansky, L.; Aparicio, C., (2023), "Electrostatic capture of viruses on cationic biopolymer membranes for intra-oral disease sampling", Colloids and Surfaces B: Biointerfaces, vol. 232, ISSN: 1873-4367.
Mutreja, I.; Lan, C.; Li, Q.; Aparicio, C., (2023), "Chemoselective Coatings of GL13K Antimicrobial Peptides for Dental Implants", Pharmaceutics, vol. 15, No. 10, ISSN: 1999-4923.
Lopes, V.R.; Birgersson, U.; Manivel, V.; Hulsart, G.; Gallinetti , S.; Aparicio, C.; Hong, J., (2023), "Human Whole Blood Interactions with Craniomaxillofacial Reconstruction Materials: Exploring In Vitro the Role of Blood Cascades and Leukocytes in Early Healing Events", JOURNAL OF FUNCTIONAL BIOMATERIALS, vol. 14, No. 7, ISSN: 2079-4983.
Blasi, Á.; Henarejos-Domingo, V.; Palacios, R.; Aparicio, C.; Roig Cayon, M, (2023), "Comparison accuracy of digital and analog method using milled occlusal splints", Journal of Esthetic and Restorative Dentistry, ISSN: 1496-4155.
Blasi, Á.; Henarejos-Domingo, V.; Palacios-Bañuelos, R.; Vidal, C.; Aparicio, C.; Roig Cayon, M, (2023), "CAD-CAM and analog occlusal splints comparison based on the amount of occlusal adjustments. 3D analysis of the volumetric changes: A pilot study", Journal of Esthetic and Restorative Dentistry, vol. 35, No. 8, pp. 1271-1278, ISSN: 1496-4155.
Gargallo Albiol, J; Fischer, N.G.; Aparicio, C.; Wang, H., (2023), "Keratinocyte Proliferation and Hemidesmosome Formation on Surfaces for Dental Implants: In Vitro Study", International journal of oral and maxillofacial implants, vol. 38, No. 3, pp. 496-502, ISSN: 0882-2786.
Ye, Z.; Qi, Y.; Zhang, A.; Karels, B.; Aparicio, C., (2023), "Biomimetic Mineralization of Fibrillar Collagen with Strontium-doped Hydroxyapatite", ACS Macro Letters, vol. 12, No. 3, pp. 408-414, ISSN: 2161-1653.
Pizarek, J.; Fischer, N.G.; Aparicio, C., (2023), "Immunomodulatory IL-23 receptor antagonist peptide nanocoatings for implant soft tissue healing", Dental materials, ISSN: 0109-5641.
Raptopoulos, M.; Fischer, N.G.; Aparicio, C., (2023), "Implant surface physicochemistry affects keratinocyte hemidesmosome formation", Journal of Biomedical Materials Research Part A, ISSN: 1552-4965.
Fischer, N.G.; Aparicio, C., (2022), "Junctional epithelium and hemidesmosomes: Tape and rivets for solving the “percutaneous device dilemma” in dental and other permanent implants", Bioactive Materials, vol. 18, pp. 178-198, ISSN: 2452-199X.
Moussa, D.; Sharma, A.; Mansour, T.; Witthuhn , B.; Perdigao, J.; Rudney, J.; Aparicio, C.; Gómez, A., (2022), "Functional signatures of ex-vivo dental caries onset", Journal of Oral Microbiology, vol. 14, No. 1, ISSN: 2000-2297.
Kim, Y.; Dawson, J.; Oreffo, R.; Tabata, Y.; Kumar, D.; Aparicio, C.; Mutreja, I., (2022), "Gelatin Methacryloyl Hydrogels for Musculoskeletal Tissue Regeneration", Bioengineering, vol. 9, No. 7, ISSN: 2306-5354.
Billstrom, G.; Lopes, V.R.; Illies, C.; Gallinetti , S.; Aberg, J.; Engqvist, H.; Aparicio, C.; Larsson, S.; Linder, L.K.B.; Birgersson, U., (2022), "Guiding bone formation using semi-onlay calcium phosphate implants in an ovine calvarial model", Journal of tissue engineering and regenerative medicine, vol. 16, No. 5, pp. 435-447, ISSN: 1932-6254.
Mutreja, I.; Kumar, D.; Hogan, K.; Campbel, E.; Mansky, K.; Aparicio, C., (2022), "Strontium- and peptide-modified silicate nanostructures for dual osteogenic and antimicrobial activity", Biomaterials Advances, vol. 135, ISSN: 2772-9508.
Fischer, N.G.; Kobe, A.; Dai, J.; He, J.; Wang, H.; Pizarek, J.; De Jong, D.; Ye, Z.; Huang, S.; Aparicio, C., (2022), "Tapping basement membrane motifs: Oral junctional epithelium for surface-mediated soft tissue attachment to prevent failure of percutaneous devices", Acta biomaterialia, vol. 141, pp. 70-88, ISSN: 1742-7061.
Ye, Z.; Sang, T.; Li, K.; Fischer, N.G.; Mutreja, I.; Echeverria, C.; Kumar, D.; Tang, Z.; Aparicio, C., (2022), "Hybrid nanocoatings of self-assembled organic-inorganic amphiphiles for prevention of implant infections", Acta biomaterialia, vol. 140, pp. 338-349, ISSN: 1742-7061.
Cruz, Nuno; Gil, J.; Punset, M.; Manero, J.; Tondela, J.; Verdeguer, P.; Aparicio, C.; Rupérez, E., (2022), "Relevant Aspects of Piranha Passivation in Ti6Al4V Alloy Dental Meshes", Coatings, vol. 12, No. 2, ISSN: 2079-6412.
Boda, S.K.; Aparicio, C., (2022), "Dual keratinocyte-attachment and anti-inflammatory coatings for soft tissue sealing around transmucosal oral implants", Biomaterials science, vol. 10, No. 3, pp. 665-677, ISSN: 2047-4830.
Marston, S.; Mirick Mueller, G.; Sabin, A.; Hansen, G.; Lindgren, B.; Aparicio, C.; Armstrong, A.; Larsen, O.; Schmidt, A.; Kyle, R.; Gustilo, R.; Tsukayama , D.; Bechtold, J.; Bue, M., (2022), "Systemic versus free antibiotic delivery in preventing acute exogenous implant related infection in a rat model", Journal of orthopaedic research, vol. 40, No. 2, pp. 429-438, ISSN: 0736-0266.
Kumar, D.; Ghose, D.; Mutreja, I.; Bolskar, R.D.; Aparicio, C.; Jones, R.S., (2022), "Utilizing a degradation prediction pathway system to understand how a novel methacrylate derivative polymer with flipped external ester groups retains physico-mechanical properties following esterase exposure", Dental materials, vol. 38, No. 2, pp. 251-265, ISSN: 0109-5641.
Moussa, D.; Sharma, A.; Mansour, T.; Witthuhn , B.; Perdigao, J.; Rudney, J.; Aparicio, C.; Gómez, A., (2022), "Functional Biomarkers of Ex-vivo Dental Caries Onset", Journal of Oral Microbiology, ISSN: 2000-2297.
Cieplik, F.; Aparicio, C.; Kret, J.; Schmalz, G., (2022), "Development of standard protocols for biofilm-biomaterial interface testing", JADA Foundational Science, vol. 1, ISSN: 2772-414X.
Ye, Z.; Aparicio, C., (2022), "Interactions of two enantiomers of a designer antimicrobial peptide with structural components of the bacterial cell envelope", Journal of peptide science, vol. 28, No. 1, ISSN: 1075-2617.
Dey , D.; Fisher, N.; Dragon, A.; Ronzier, E.; Mutreja, I.; Danielson, D.; Homer, C.; Forsberg, J.; Bechtold, J.; Aparicio, C.; Davis, T., (2021), "Culture and characterization of various porcine integumentary-connective tissue-derived mesenchymal stromal cells to facilitate tissue adhesion to percutaneous metal implants", Stem Cell Research & Therapy, vol. 12, ISSN: 1757-6512.
Fisher, N.; Moussa, D.; Skoe, E.; De Jong, D.; Aparicio, C., (2021), "Keratinocyte-Specific Peptide-Based Surfaces for Hemidesmosome Upregulation and Prevention of Bacterial Colonization", ACS Biomaterials-Science & Engineering, vol. 6, No. 9, pp. 4929-4939, ISSN: 2373-9878.
Espósito, M.; Aparicio, C.; Xhanari, E.; Meloni, S.; Bolle, C.; Buti, J.; Boda, S.K.; Tallarico, M., (2021), "Machined versus cast abutments for dental implants: a 1-year within patient multicentre randomized controlled trial assessing marginal seal capacity and outcomes", Clinical Trials in Dentistry, vol. 3, No. 2, pp. 19-31, ISSN: 2785-3039.
Fisher, N.; Chen, X.; Astleford, K.; He, J.; Mullikin, A.; Mansky, K.; Aparicio, C., (2021), "Antimicrobial and enzyme-responsive multi-peptide surfaces for bone-anchored devices", Materials Science & Engineering C-Materials for Biological Applications, vol. 125, ISSN: 0928-4931.
Fisher, N.; Aparicio, C., (2021), "The salivary pellicle on dental biomaterials", Colloids and Surfaces B. Biointerfaces, vol. 200, ISSN: 0927-7765.
Ye, Z.; Zhu, X.; Mutreja, I.; Boda, S.K.; Fisher, N.; Zhang, A.; Lui, C.; Qi, Y.; Aparicio, C., (2021), "Biomimetic mineralized hybrid scaffolds with antimicrobial peptides", Bioactive Materials, vol. 6, No. 8, pp. 2250-2260, ISSN: 2452-199X.
Boda, S.K.; Fisher, N.; Ye, Z.; Aparicio, C., (2020), "Dual Oral Tissue Adhesive Nanofiber Membranes for pH-Responsive Delivery of Antimicrobial Peptides", Biomacromolecules, vol. 21, No. 12, pp. 4945-4961, ISSN: 1525-7797.
Ye, Z.; Kobe, A.; Sang, T.; Aparicio, C., (2020), "Unraveling dominant surface physicochemistry to build antimicrobial peptide coatings with supramolecular amphiphiles", Nanoscale, vol. 12, No. 40, pp. 20767-20775, ISSN: 2040-3364.
Fisher, N.; Münchow, E.; Tamerler, C.; Bottino, M.; Aparicio, C., (2020), "Harnessing biomolecules for bioinspired dental biomaterials", Journal of materials chemistry B, vol. 8, No. 38, pp. 8713-8747, ISSN: 2050-750X.
Kumar, D.; Bolskar, R.D.; Malone, S.; Mutreja, I.; Aparicio, C.; Jones, R.S., (2020), "A Novel Dental Polymer with a Flipped External Ester Group Design that Resists Degradation via Polymer Backbone Preservation", ACS Biomaterials-Science & Engineering, vol. 6, No. 10, pp. 5609-5619, ISSN: 2373-9878.
Blixt, N.; Norton, A.; Zhang, A.; Aparicio, C.; Prasad, H.; Gopalakrishnan, R.; Jensen, E.; Mansky, K., (2020), "Loss of Myocyte Enhancer Factor 2 Expression in Osteoclasts Leads to Opposing Skeletal Phenotypes", Bone, vol. 138, ISSN: 8756-3282.
Qi, Y.; Mai, S.; Ye, Z.; Aparicio, C., (2020), "Biomimetic fabrication and characterization of collagen/strontium hydroxyapatite nanocomposite", Materials letters, vol. 274, ISSN: 0167-577X.
Nandula, S.; Huxford, I.; Wheeler, T.; Aparicio, C.; Gorr, S., (2020), "The parotid secretory protein BPIFA2 is a salivary surfactant that affects lipopolysaccharide action", Experimental physiology, vol. 105, No. 8, pp. 1280-1292, ISSN: 0958-0670.
Acosta, S.; Ye, Z.; Aparicio, C.; Alonso, M.; Rodriguez Cabello, J., (2020), "Dual Self-Assembled Nanostructures from Intrinsically Disordered Protein Polymers with LCST Behavior and Antimicrobial Peptides", Biomacromolecules, vol. 21, No. 10, pp. 4043-4052, ISSN: 1525-7797.
Toledano, M.; Osorio, R.; Aguilera, F.; Medina Castillo, A.; Toledano, M.; Osorio, E.; Acosta, S.; Chen, R.; Aparicio, C., (2020), "Polymeric nanoparticles protect the resin-dentin bonded interface from cariogenic biofilm degradation", Acta biomaterialia, vol. 111, pp. 316-326, ISSN: 1742-7061.
Moussa, D.; Aparicio, C., (2020), "Targeting the oral plaque microbiome with immobilized anti-biofilm peptides at tooth-restoration interfaces", PLoS One, vol. 15, No. 7, ISSN: 1932-6203.
Overmann, A.; Aparicio, C.; Richards , J.; Mutreja, I.; Fisher, N.; Wade, S.; Potter, B.; Davis, T.; Bechtold, J.; Forsberg, J.; Dey , D., (2020), "Orthopaedic osseointegration: Implantology and future directions", Journal of orthopaedic research, vol. 38, No. 7, pp. 1445-1454, ISSN: 0736-0266.
Aguilar Pérez, D.; Vargas Coronado, R.; Cervantes Uc, J.; Rodríguez Fuentes, N.; Aparicio, C.; Covarrubias, C.; Álvarez Pérez, M.; García Pérez, V.; Martínez Hernández, M.; Cauich Rodríguez, J., (2020), "Antibacterial activity of a glass ionomer cement doped with copper nanoparticles", DENTAL MATERIALS JOURNAL, vol. 39, No. 3, pp. 389-396, ISSN: 0287-4547.
Fisher, N.; He, J.; Aparicio, C., (2020), "Surface Immobilization Chemistry of a Laminin-Derived Peptide Affects Keratinocyte Activity", Coatings, vol. 10, No. 6, ISSN: 2079-6412.
Zhang, A.; Chen, R.; Aregawi, W.; He, Y.; Wang, S.; Aparicio, C.; Rudney, J.; Chew, H.; Fok, A., (2020), "Development and Calibration of Biochemical Models for Testing Dental Restorations", Acta biomaterialia, vol. 109, pp. 132-141, ISSN: 1742-7061.
Robinson, J.; Blixt, N.; Norton, A.; Mansky, K.; Ye, Z.; Aparicio, C.; Wagner, B.; Benton, A.; Warren, G.; Khosla , S.; Gaddy, D.; Suva, L.; Potter, L., (2020), "Male mice with elevated C-type natriuretic peptide-dependent guanylyl cyclase-B activity have increased osteoblasts, bone mass and bone strength", Bone, vol. 135, ISSN: 8756-3282.
Sang, T.; Ye, Z.; Fisher, N.; Skoe, E.; Echeverria, C.; Wu, J.; Aparicio, C., (2020), "Physical-chemical interactions between dental materials surface, salivary pellicle and Streptococcus gordonii", Colloids and Surfaces B: Biointerfaces, vol. 190, ISSN: 1873-4367.
Acosta, S.; Ibañez Fonseca, A.; Aparicio, C.; Rodriguez Cabello, J., (2020), "Antibiofilm coatings based on protein-engineered polymers and antimicrobial peptides for preventing implant-associated infections", Biomaterials science, vol. 8, No. 10, pp. 2866-2877, ISSN: 2047-4830.
Ye, Z.; Aparicio, C., (2019), "Modulation of supramolecular self-assembly of an antimicrobial designer peptide by single amino acid substitution: implications on peptide activity", NANOSCALE ADVANCES, vol. 1, No. 12, pp. 4679-4682, ISSN: 2516-0230.
Yun, J.; Wu, J.; Aparicio, C.; Hon Tsoi, J.; Wang, Y.; Fok, A., (2019), "Enzyme-Mediated Mineralization of TiO2 Nanotubes on Titanium Surface", Crystal growth and design, vol. 19, No. 12, pp. 7112-7121, ISSN: 1528-7483.
Cheng, Z.; Ye, Z.; Natan, A.; Ma, Y.; Li, H.; Chen, Y.; Wan, L.; Aparicio, C.; Zhu, H., (2019), "Bone-Inspired Mineralization with Highly Aligned Cellulose Nanofibers as Template", ACS Applied materials and interfaces, vol. 11, No. 45, pp. 42486-42495, ISSN: 1944-8244.
Acosta, S.; Quintanilla, L.; Alonso, M.; Aparicio, C.; Rodriguez Cabello, J., (2019), "Recombinant AMP/Polypeptide Self-Assembled Monolayers with Synergistic Antimicrobial Properties for Bacterial Strains of Medical Relevance", ACS Biomaterials-Science & Engineering, vol. 5, No. 9, pp. 4708-4716, ISSN: 2373-9878.
Moussa, D.; Kirihara, J.; Ye, Z.; Fisher, N.; Khot, J.; Witthuhn , B.; Aparicio, C., (2019), "Dentin Priming with Amphipathic Antimicrobial Peptides", Journal of dental research, vol. 98, No. 10, pp. 1112-1121, ISSN: 0022-0345.
Qi, Y.; Cheng, Z.; Ye, Z.; Zhu, H.; Aparicio, C., (2019), "Bioinspired Mineralization with Hydroxyapatite and Hierarchical Naturally Aligned Nanofibrillar Cellulose", ACS Applied materials and interfaces, vol. 11, No. 31, pp. 27598-27604, ISSN: 1944-8244.
He, Y.; Fok, A.; Aparicio, C.; Teng, W., (2019), "Contact analysis of gap formation at dental implant-abutment interface under oblique loading: A numerical-experimental study", Clinical implant dentistry and related research, vol. 21, No. 4, pp. 741-752, ISSN: 1523-0899.
Macías, J.; Sordi, M.; Kanazawa, M.; Ravindran, S.; Henriques, B.; Silva, F.; Aparicio, C.; Cooper, L., (2019), "Nano-scale modification of titanium implant surfaces to enhance osseointegration", Acta biomaterialia, vol. 94, pp. 112-131, ISSN: 1742-7061.
Moussa, D.; Fok, A.; Aparicio, C., (2019), "Hydrophobic and antimicrobial dentin: A peptide-based 2-tier protective system for dental resin composite restorations", Acta biomaterialia, vol. 88, pp. 251-265, ISSN: 1742-7061.
Tatullo, M.; Spagnuolo, G.; Cadispoti, B.; Zamparini, F.; Zhang, A.; Degli Esposti, M.; Aparicio, C.; Rengo, C.; Nuzzolese, M.; Manzoli, L.; Fava, F.; Prati, C.; Fabbri, P.; Gandolfi, M., (2019), "PLA-Based Mineral-Doped Scaffolds Seeded with Human Periapical Cyst-Derived MSCs: A Promising Tool for Regenerative Healing in Dentistry", Materials, vol. 12, No. 4, ISSN: 1996-1944.
Moussa, D.; Aparicio, C., (2019), "Present and future of tissue engineering scaffolds for dentin-pulp complex regeneration", Journal of tissue engineering and regenerative medicine, vol. 13, No. 1, pp. 58-75, ISSN: 1932-6254.
Ye, Z.; Zhu, X.; Acosta, S.; Kumar, D.; Sang, T.; Aparicio, C., (2018), "Self-assembly Dynamics and Antimicrobial Activity of All L- and D-amino Acid Enantiomers of a Designer Peptide", Nanoscale, vol. 11, No. 1, pp. 266-275, ISSN: 2040-3364.
Qi, Y.; Ye, Z.; Fok, A.; Holmes, B.; Espanol, M.; Ginebra, MP.; Aparicio, C., (2018), "Effects of Molecular Weight and Concentration of Poly(Acrylic Acid) on Biomimetic Mineralization of Collagen", ACS Applied materials and interfaces, vol. 4, No. 8, pp. 2758-2766, ISSN: 1944-8244.
Gil, J.; Ruperez, E.; Velasco, E.; Aparicio, C.; Manero, J., (2018), "Mechanism of fracture of NiTi superelastic endodontic rotary instruments", Journal of materials science. Materials in medicine, vol. 29, ISSN: 0957-4530.
Koidou, V.; Argyris, P.; Skoe, E.; Mota Siqueira, J.; Chen, X.; Zhang, L.; Hinrichs, J.; Costalonga, M.; Aparicio, C., (2018), "Peptide Coatings Enhance Keratinocyte Attachment towards Improving Peri-implant Mucosal Seal", Biomaterials science, vol. 6, No. 7, pp. 1936-1945, ISSN: 2047-4830.
Larrucea, C.; Aparicio, C.; Olivares, D.; Padilla, C.; Barrera, A.; Lobos, O., (2018), "Bacterial microleakage at the abutment-implant interface, in vitro study", Clinical implant dentistry and related research, vol. 20, No. 3, pp. 360-367, ISSN: 1523-0899.
Sevilla, P.; Cirera, A.; Dotor, J.; Gil, J.; Galindo, P.; Aparicio, C., (2018), "In vitro cell response on CP-Ti surfaces functionalized with TGF-beta 1 inhibitory peptides", Journal of materials science. Materials in medicine, vol. 29, No. 6, ISSN: 0957-4530.
Gandolfi, M.; Zamparini, F.; Degli Esposti, M.; Chiellini, F.; Aparicio, C.; Fava, F.; Fabbri, P.; Taddei, P.; Prati, C., (2018), "Polylactic acid-based porous scaffolds doped with calcium silicate and dicalcium phosphate dihydrate designed for biomedical application", Materials science and engineering C. Biomimetic and supramolecular systems, vol. 82, pp. 163-181, ISSN: 0928-4931.
Carrera, C.; Li, Y.; Chen, R.; Aparicio, C.; Fok, A.; Rudney, J., (2017), "Interfacial degradation of adhesive composite restorations mediated by oral biofilms and mechanical challenge in an extracted tooth model of secondary caries", Journal of dentistry, vol. 66, pp. 62-70, ISSN: 0300-5712.
SEVILLA, P.; Gil, J.; Aparicio, C., (2017), "Relevant Properties for Immobilizing Short Peptides on Biosurfaces.", IRBM, vol. 38, No. 5, pp. 256-265, ISSN: 1959-0318.
Mattotti, M.; Alvarez, Z.; Delgado, LM; Mateos, M.; Aparicio, C.; Planell, J.; Alcántara, S.; Engel, E., (2017), "Differential neuronal and glial behavior on flat and micro patterned chitosan films", Colloids and Surfaces B. Biointerfaces, vol. 158, pp. 569-577, ISSN: 0927-7765.
Harmouche, N.; Aisenbrey, C.; Porcelli, F.; Xia, Y.; Nelson, S.; Chen, X.; Raya, J.; Vermeer, L.; Aparicio, C.; Veglia, G.; Gorr, S.; Bechinger, B., (2017), "Solution and Solid-State Nuclear Magnetic Resonance Structural Investigations of the Antimicrobial Designer Peptide GL13K in Membranes", Biochemistry, vol. 56, No. 32, pp. 4269-4278, ISSN: 0006-2960.
Prasaad Govindharajulu, J.; Chen, X.; Li, Y.; Rodriguez Cabello, J.; Battacharya, M.; Aparicio, C., (2017), "Chitosan-Recombinamer Layer-by-Layer Coatings for Multifunctional Implants", International Journal of Molecular Sciences, vol. 18, No. 2, ISSN: 1422-0067.
Chen, X.; Zhou, X.; Liu, S.; Wu, R.; Aparicio, C.; Wu, J., (2017), "In vivo osseointegration of dental implants with an antimicrobial peptide coating", Journal of materials science. Materials in medicine, vol. 28, No. 5, ISSN: 0957-4530.
Li, Y.; Rodríguez-Cabello, J.C.; Aparicio, C., (2017), "Intrafibrillar Mineralization of Self-Assembled Elastin-Like Recombinamer Fibrils", ACS Applied materials and interfaces, vol. 9, No. 7, pp. 5838-5846, ISSN: 1944-8244.
Díaz Quiroz, J.; Li, Y.; Aparicio, C.; Echeverri, K., (2016), "Development of a 3D matrix for modeling mammalian spinal cord injury in vitro", Neural regeneration research, vol. 11, No. 11, pp. 1810-1815, ISSN: 1673-5374.
Caparrós, C.; Ortiz Hernandez, M.; Molmeneu, M.; Punset, M.; Calero, F.; Aparicio, C.; Fernandez-Fairen, M.; Perez, R.; Gil, J., (2016), "Bioactive macroporous titanium implants highly interconnected", Journal of materials science. Materials in medicine, vol. 27, No. 10, pp. 151-162, ISSN: 0957-4530.
Carrera, C.; Chen, Y.; Li, Y.; Rudney, J.; Aparicio, C.; Fok, A., (2016), "Dentin-composite bond strength measurement using the Brazilian disk test", Journal of dentistry, vol. 52, pp. 37-44, ISSN: 0300-5712.
Kotsakis, G.; Lan, C.; Barbosa, J.; Lill, K.; Chen, R.; Rudney, J.; Aparicio, C., (2016), "Antimicrobial Agents Used in the Treatment of Peri-Implantitis Alter the Physicochemistry and Cytocompatibility of Titanium Surfaces", Journal of periodontology, vol. 87, No. 7, pp. 809-819, ISSN: 0022-3492.
Sevilla, P.; Vining, K.; Dotor, J.; Rodríguez, Daniel; Gil, J.; Aparicio, C., (2016), "Surface immobilization and bioactivity of TGF-B1 inhibitor peptides for bone implant applications", Journal of biomedical materials research. Part B, Applied biomaterials, vol. 104, No. 2, pp. 385-394, ISSN: 1552-4973.
Rupérez, E.; Manero, J.; Riccardi, K.; Li, Y.; Aparicio, C.; Gil, J., (2015), "Development of tantalum scaffold for orthopaedic applications produced by space-holder method", Materials and design, vol. 83, pp. 112-119, ISSN: 0261-3069.
Li, Y.; Chen, X.; Fok, A.; Rodriguez Cabello, J.; Aparicio, C., (2015), "Biomimetic Mineralization of Recombinamer-Based Hydrogels toward Controlled Morphologies and High Mineral Density", ACS Applied materials and interfaces, vol. 7, No. 46, pp. 25784-25792, ISSN: 1944-8244.
Fernández García, E.; Chen, X.; Gutiérrez González, C.; Fernandez, A.; López Esteban, S.; Aparicio, C., (2015), "Peptide-functionalized zirconia and new zirconia/titanium biocermets for dental applications", Journal of dentistry, vol. 43, No. 9, pp. 1162-1174, ISSN: 0300-5712.
Li, Y.; Carrera, C.; Chen, R.; Li, J.; Chen, Y.; Lenton, P.; Rudney, J.; Jones, R.S.; Aparicio, C.; Fok, A., (2015), "Fatigue failure of dentin-composite disks subjected to cyclic diametral compression", Dental materials, vol. 31, No. 7, pp. 778-788, ISSN: 0109-5641.
Carrera, C.; Lan, C.; Escobar Sanabria, D.; Li, Y.; Rudney, J.; Aparicio, C.; Fok, A., (2015), "The use of micro-CT with image segmentation to quantify leakage in dental restorations", Dental materials, vol. 31, No. 4, pp. 382-390, ISSN: 0109-5641.
Chen, X.; Hirt, H.; Li, Y.; Gorr, S.; Aparicio, C., (2014), "Antimicrobial GL13K peptide coatings killed and ruptured the wall of Streptococcus gordonii and prevented formation and growth of biofilms", PLoS One, vol. 9, No. 11, ISSN: 1932-6203.
Li, Y.; Chen, X.; Ribeiro, A.; Jensen, E.; V Holmberg, K.; Rodriguez Cabello, J.; Aparicio, C., (2014), "Hybrid nanotopographical surfaces obtained by biomimetic mineralization of statherin-inspired elastin-like recombinamers", Advanced Healthcare Materials, vol. 3, No. 10, pp. 1638-1647, ISSN: 2192-2640.
Isfeld, D.; Aparicio, C.; Jones, R.S., (2014), "Assessing near infrared optical properties of ceramic orthodontic brackets using cross-polarization optical coherence tomography", Journal of biomedical materials research. Part B, Applied biomaterials, vol. 102, No. 3, pp. 516-523, ISSN: 1552-4973.
Salvagni, E.; Berguig, G.; Engel, E.; Rodriguez-Cabello, J.C.; Coullerez, G.; Textor, M.; Planell, J.; Gil, J.; Aparicio, C., (2014), "A bioactive elastin-like recombinamer reduces unspecific protein adsorption and enhances cell response on titanium surfaces", Colloids and Surfaces B. Biointerfaces, vol. 114, pp. 225-233, ISSN: 0927-7765.
Marín Pareja, N.; Salvagni, E.; Guillem, J.; Aparicio, C.; Ginebra, MP., (2014), "Collagen-functionalised titanium surfaces for biological sealing of dental implants: effect of immobilisation process on fibroblasts response", Colloids and Surfaces B. Biointerfaces, vol. 122, pp. 601-610, ISSN: 0927-7765.
Li, Y.; Carrera, C.; Chen, R.; Li, J.; Lenton, P.; Rudney, J.; Jones, R.S.; Aparicio, C.; Fok, A., (2014), "Degradation in the dentin-composite interface subjected to multi-species biofilm challenges", Acta biomaterialia, vol. 10, No. 1, pp. 375-383, ISSN: 1742-7061.
Gil, J.; Manzanares, N.; Badet, A.; Aparicio, C.; Ginebra, MP., (2014), "Biomimetic treatment on dental implants for short-term bone regeneration", Clinical Oral Investigations, vol. 18, No. 1, pp. 59-66, ISSN: 1432-6981.
Li, Y.; Aparicio, C., (2013), "Discerning the Subfibrillar Structure of Mineralized Collagen Fibrils: A Model for the Ultrastructure of Bone", PLoS One, vol. 8, No. 9, ISSN: 1932-6203.
V Holmberg, K.; Abdholosseini, M.; Li, Y.; Chen, X.; Gorr, S.; Aparicio, C., (2013), "Bio-inspired stable antimicrobial peptide coatings for dental applications", Acta biomaterialia, vol. 9, No. 9, pp. 8224-8231, ISSN: 1742-7061.
Mestres, G.; Abdholosseini, M.; Bowles, W.; Huang, S.; Aparicio, C.; Gorr, S.; Ginebra, MP., (2013), "Antimicrobial properties and dentin bonding strength of magnesium phosphate cements", Acta biomaterialia, vol. 9, No. 9, pp. 8384-8393, ISSN: 1742-7061.
Chen, X.; Sevilla, P.; Aparicio, C., (2013), "Surface biofunctionalization by covalent co-immobilization of oligopeptides", Colloids and Surfaces B. Biointerfaces, vol. 107, pp. 189-197, ISSN: 0927-7765.
Rudney, J.; Chen, R.; Lenton, P.; Li, J.; Li, Y.; Jones, R.S.; Reilly, C.; Fok, A.; Aparicio, C., (2012), "A reproducible oral microcosm biofilm model for testing dental materials", Journal of applied microbiology, vol. 113, No. 6, pp. 1540-1553, ISSN: 1364-5072.
Pegueroles, M.; Tonda-Turo, C.; Planell, J.; Gil, J.; Aparicio, C., (2012), "Adsorption of Fibronectin, Fibrinogen, and Albumin on TiO2: Time-Resolved Kinetics, Structural Changes, and Competition Study", Journal of the Royal Society Interface, vol. 7, No. 1, pp. 1-13, ISSN: 1742-5689.
Sargeant, T.; Aparicio, C.; Goldberger, J.; Cui, H.; Stupp, S., (2012), "Mineralization of peptide amphiphile nanofibers and its effect on the differentiation of human mesenchymal stem cells", Acta biomaterialia, vol. 8, No. 7, pp. 2456-2465, ISSN: 1742-7061.
Lenton, P.; Rudney, J.; Chen, R.; Fok, A.; Aparicio, C.; Jones, R.S., (2012), "Imaging in vivo secondary caries and ex vivo dental biofilms using cross-polarization optical coherence tomography", Dental materials, vol. 28, No. 7, pp. 792-800, ISSN: 0109-5641.
Chen, R.; Rudney, J.; Aparicio, C.; Fok, A.; Jones, R.S., (2012), "Quantifying dental biofilm growth using cross-polarization optical coherence tomography", Letters in applied microbiology, vol. 54, No. 6, pp. 537-542, ISSN: 0266-8254.
Huang, S.; Lin, L.; Rudney, J.; Jones, R.S.; Aparicio, C.; Lin, C.; Fok, A., (2012), "A novel dentin bond strength measurement technique using a composite disk in diametral compression", Acta biomaterialia, vol. 8, No. 4, pp. 1597-1602, ISSN: 1742-7061.
Li, Y.; Thula, T.; Jee, S.; Perkins, S.; Aparicio, C.; Douglas, E.; Gower, L., (2011), "Biomimetic Mineralization of Woven Bone-Like Nanocomposites: Role of Collagen Cross-Links", Biomacromolecules, vol. 13, No. 1, pp. 49-59, ISSN: 1525-7797.
Aparicio, C.; Padrós, A.; Gil, J., (2011), "In vivo evaluation of micro-rough and bioactive titanium dental implants using histometry and pull-out test", Journal of the mechanical behavior of biomedical materials, vol. 4, No. 8, pp. 1672-1682, ISSN: 1751-6161.
Seong, W.; Kim, H.; Jeong, S.; DeVeau, D.; Aparicio, C.; Li, Y.; Hodges, J., (2011), "Ex vivo mechanical properties of dental implant bone cement used to rescue initially unstable dental implants: a rabbit study", International journal of oral and maxillofacial implants, vol. 26, No. 4, pp. 826-836, ISSN: 0882-2786.
Aparicio, C.; Rodriguez, D.; Gil, J., (2011), "Variation of roughness and adhesion strength of deposited apatite layers on titanium dental implants", Materials science and engineering C. Biomimetic and supramolecular systems, vol. 31, No. 2, pp. 320-324, ISSN: 0928-4931.
Pegueroles, M.; Aguirre, A.; Engel, E.; Pavon, G.; Gil, J.; Planell, J.; Migonney, V.; Aparicio, C., (2011), "Effect of blasting treatment and Fn coating on MG63 adhesion and differentiation on titanium: a gene expression study using real-time RT-PCR.", Journal of materials science. Materials in medicine, vol. 22, pp. 617-627, ISSN: 0957-4530.
Mata, Á.; Geng, Y.; Henrikson, K.; Aparicio, C.; Stock, S.; Satcher, R.; Stupp, S., (2010), "Bone regeneration mediated by biomimetic mineralization of a nanofiber matrix", Biomaterials, vol. 31, No. 23, pp. 6004-6012, ISSN: 0142-9612.
Zhang, S.; Greenfield, M.; Mata, Á.; Palmer, L.; Bitton, R.; Manteni, J.; Aparicio, C.; Olvera de la Cruz, M.; Stupp, S., (2010), "A self-assembly pathway to aligned monodomain gels", Nature materials, vol. 9, pp. 594-601, ISSN: 1476-1122.
Planell, J.; Navarro, M.; Altankov, G.; Aparicio, C.; Engel, E.; Gil, J.; Ginebra, MP.; Lacroix, D., (2010), "Materials Surface Effects on Biological Interactions", NATO Science for Peace and Security Series A. Chemistry and Biology, pp. 233-252, ISSN: 1874-6489.
Pegueroles, M.; Aparicio, C.; Bosio, M.; Engel, E.; Gil, J.; Planell, J.; Altankov, G., (2010), "Spatial organization of osteoblast fibronectin matrix on titanium surfaces", Acta biomaterialia, vol. 6, No. 1, pp. 291-301, ISSN: 1742-7061.
Gil, J.; Aparicio, C.; Manero, J.; Padrós, A., (2009), "Influence of the height of the external hexagon and surface treatment on fatigue life of commercially pure titanium dental implants", International journal of oral and maxillofacial implants, vol. 24, No. 4, pp. 583-590, ISSN: 0882-2786.
Aparicio, C.; Salvagni, E.; Werner, M.; Engel, E.; Pegueroles, M.; Rodriguez-Cabello, J.C.; Muñoz, F.; Planell, J.; Gil, J., (2009), "Biomimetic treatments on dental implants for immediate loading applications", Journal of medical devices, pp. 027555-027555, ISSN: 1932-6181.
Mata, Á.; Hsu, L.; Capito, R.; Aparicio, C.; Henrikson, K.; Stupp, S., (2009), "Micropatterning of bioactive self-assembling gels", Soft matter, vol. 6, pp. 1228-1236, ISSN: 1744-683X.
Engel, E.; del Valle, S.; Aparicio, C.; Altankov, G.; Asin, L.; Planell, J.; Ginebra, MP., (2008), "Discerning the Role of Topography and Ion Exchange in Cell Response of Bioactive Tissue Engineering Scaffolds", Tissue engineering. Part A, tissue engineering, vol. 14, No. 8, pp. 1341-1351, ISSN: 1937-3341.
Pegueroles, M.; Gil, J.; Planell, J.; Aparicio, C., (2008), "The influence of blasting and sterilization on static and time-related wettability and surface-energy properties of titanium surface", Surface and coatings technology, vol. 202, No. 15, pp. 3470-3479, ISSN: 0257-8972.
Barrabés, M.; Michiardi, A.; Aparicio, C.; Sevilla, P.; Planell, J.; Gil, J., (2007), "Oxidized nickel-titanium foams for bone reconstructions: chemical and mechanical characterization", Journal of materials science. Materials in medicine, vol. 18, pp. 2123-2129, ISSN: 0957-4530.
Aparicio, C.; Manero, J.; Conde, F.; Pegueroles, M.; Planell, J.; Vallet-Regi, M.; Gil, J., (2007), "Acceleration of apatite nucleation on microrough bioactive titanium for bone-replacing implants", Journal of biomedical materials research. Part A, vol. 82, No. 3, pp. 521-529, ISSN: 1549-3296.
Sevilla, P.; Aparicio, C.; Planell, J.; Gil, J., (2007), "Comparison of the mechanical properties between tantalum and nickel-titanium foams implant materials for bone ingrowth applications", Journal of alloys and compounds, vol. 439, No. 1-2, pp. 67-73, ISSN: 0925-8388.
Arciniegas, M.; Aparicio, C.; Manero, J.; Gil, J., (2007), "Low elastic modulus metals for joint prosthesis: Tantalum and nickel-titanium foams", Journal of the european ceramic society, vol. 27, No. 11, pp. 3391-3398, ISSN: 0955-2219.
Michiardi, A.; Engel, E.; Aparicio, C.; Planell, J.; Gil, J., (2007), "Oxidized NiTi surface enhance differentiation of osteoblast-like cells", Journal of biomedical materials research. Part A, vol. 85, No. 1, pp. 108-114, ISSN: 1549-3296.
Michiardi, A.; Aparicio, C.; Planell, J.; Gil, J., (2007), "Electrochemical behaviour of oxidized NiTi shape memory alloys for biomedical applications", Surface and coatings technology, vol. 201, No. 14, pp. 6484-6488, ISSN: 0257-8972.
Gil, J.; Planell, J.; Padrós, A.; Aparicio, C., (2007), "The effect of shot blasting and heat treatment on the fatigue behavior of titanium for dental implant applications", Dental materials, vol. 23, No. 4, pp. 486-491, ISSN: 0109-5641.
Michiardi, A.; Aparicio, C.; Ratner, B.; Planell, J.; Gil, J., (2007), "The influence of surface energy on competitive protein adsorption on oxidized NiTi sufaces", Biomaterials, vol. 28, No. 4, pp. 586-594, ISSN: 0142-9612.
Traykova, T.; Aparicio, C.; Ginebra, MP.; Planell, J., (2006), "Bioceramics as nanomaterials", Nanomedicine, vol. 1, No. 1, pp. 91-106, ISSN: 1743-5889.
Michiardi, A.; Aparicio, C.; Planell, J.; Gil, J., (2006), "New oxidation treatment of NiTi shape memory alloys to obtain Ni-free surfaces and to improve biocompatibility", Journal of biomedical materials research. Part B, Applied biomaterials, vol. 77, No. 2, pp. 249-256, ISSN: 1552-4973.
Aparicio, C.; Padrós, A.; Gil, J.; Planell, J., (2006), "Superficies de titanio en implantes dentales de carga inmediata", Biomecánica, vol. 14, pp. 8-15, ISSN: 1135-2205.
Navarro, M.; Aparicio, C.; Charles Harris, M.; Ginebra, MP.; Engel, E.; Planell, J., (2006), "Development of a biodegradable composite scaffold for bone tissue engineering: physico- chemical, topographical, mechanical, degradation and biological properties", Advances in polymer science, vol. 200, pp. 209-231, ISSN: 0065-3195.
Charles Harris, M.; Navarro, M.; Engel, E.; Aparicio, C.; Ginebra, MP.; Planell, J., (2005), "Surface characterization of completely degradable composite scaffolds", Journal of materials science. Materials in medicine, vol. 16, pp. 1125-1130, ISSN: 0957-4530.
Engel, E.; Asin, L.; Delgado, J.; Aparicio, C.; Planell, J.; Ginebra, MP., (2005), "Cell behaviour of Calcium Phosphate Bone Cement Modified with a Protein-based Foaming Agent", Key engineering materials, vol. 284, No. 286, pp. 117-120, ISSN: 1013-9826.
Morejón, L.; Mendizábal, E.; Garcia-Menocal, J.; Ginebra, MP.; Aparicio, C.; Gil, J.; Marsal, M.; Davidenko, N.; Ballesteros, M.; Planell, J., (2005), "Static mechanical properties of hydroxyapatite (HA) powder-filled acrylic bone cements: Effect of type of HA powder", Journal of biomedical materials research. Part B, Applied biomaterials, vol. 72, No. 2, pp. 345-352, ISSN: 1552-4973.
Sánchez, S.; Navarro, M.; Aparicio, C.; Ginebra, MP.; Planell, J., (2005), "Control de la velocidad de degradación de materiales compuestos para aplicaciones biomédicas", Biomecánica, vol. 12, No. 1, pp. 44-53, ISSN: 1885-9518.
Pegueroles, M.; Menéndez, E.; Aparicio, C.; Planell, J.; Gil, J., (2005), "Influencia del proceso de esterilización en la mojabilidad del titanio modificado superficialmente.", Biomecánica, vol. 12, pp. 80-87, ISSN: 1135-2205.
Ginebra, MP.; Aparicio, C.; Engel, E.; Navarro, M.; Gil, J.; Planell, J., (2004), "Calcium phosphate bone substitutes", Medical journal of Malaysia, vol. 59, No. Suppl. B, pp. 65-66, ISSN: 0300-5283.
Morejón, L.; Mendizábal, E.; Delgado, J.; Ginebra, MP.; Aparicio, C.; Gil, J.; Marsal, M.; Davidenko, N.; Planell, J., (2004), "Tenacidad a fractura de cementos óseos modificados con hidroxiapatita", Ingeniería química, pp. 67-72, ISSN: 0325-5395.
Aparicio, C.; Gil, J.; Thams, U.; Muñoz, F.; Padrós, A.; Planell, J., (2003), "Osseointegration of Grit-Blasted and Bioactive Titanium Implants: Histomorphometry in Minipigs", Key engineering materials, vol. 254, pp. 737-740, ISSN: 1013-9826.
Gil, J.; Aparicio, C.; Padrós, A.; Thams, U., (2003), "Análisis y diferencias de las superficies de los implantes arenados con óxido de aluminio, con otros materiales abrasivos y tratados mediante grabado ácido.", Revista odontoestomatológica de implantes, pp. 14-26, ISSN: 1133-1615.
Gil, J.; Crespo, A.; Aparicio, C.; Peña, J.; Marsal, M.; Planell, J., (2003), "Aflojamiento de tornillos de conexión implante-dental-prótesis mediante simulación de cargas cíclicas masticatorias", Anales de mecánica de la fractura, vol. 20, pp. 491-494, ISSN: 0213-3725.
Aparicio, C.; Gil, J.; Fonseca, C.; Barbosa, M.; Planell, J., (2003), "Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of short particles for dental implant applications", Biomaterials, vol. 24, No. 2, pp. 263-273, ISSN: 0142-9612.
Ginebra, MP.; Albuixcech, L.; Fernández-Barragán, E.; Aparicio, C.; Gil, J.; Román , J.; Planell, J., (2002), "Mechanical perfomance of acrilic bone cements contaning different radiopacifying agents", Biomaterials, pp. 1873-1878, ISSN: 0142-9612.
Aparicio, C.; Gil, J.; Planell, J.; Engel, E., (2002), "Human-osteoblast proliferation and differentiation on grit-blasted and bioactive titanium for dental applications", Journal of materials science. Materials in medicine, vol. 13, pp. 1105-1111, ISSN: 0957-4530.
Gil, J.; Aparicio, C.; Padrós, A.; Thams, U.; Román, S.; Muñoz, F., (2002), "Análisis y diferencias de las superficies de los implantes arenados con óxido de aluminio, con otros materiales abrasivos y tratados mediante grabado ácido.", Revista odontoestomatológica de implantes, vol. 11, pp. 14-26, ISSN: 1133-1615.
Manero, J.; Salsench, J.; Nogueras, J.; Aparicio, C.; Padrós, A.; Balcells, M.; Planell, J.; Gil, J., (2002), "Growth of bioactive surfaces on dental implants", Implant dentistry, vol. 11, No. 2, pp. 170-175, ISSN: 1056-6163.
Rodríguez Lorenzo, L.; Vallet-Regi, M.; F. Ferreira, J.; Ginebra, MP.; Aparicio, C.; Planell, J., (2002), "Hydroxyapatite ceramic bodies with tailored mechanical properties for different applications", Journal of biomedical materials research, vol. 60, No. 1, pp. 159-166, ISSN: 0021-9304.
Ginebra, MP.; Albuixcech, L.; Fernández-Barragán, E.; Aparicio, C.; Gil, J.; Román, S.; Vázquez, V.; Planell, J., (2002), "Mechanical performannce of acrylic bone cements containing different radiopacifying agents", Biomaterials, vol. 23, No. 8, pp. 1873-1882, ISSN: 0142-9612.
Manero, J.; Salsench, J.; Nogueras, J.; Aparicio, C.; Padrós, A.; Balcells, M.; Gil, J.; Planell, J., (2002), "Crecimiento de Superficies Bioactivas en Implantes Dentales", Revista odontoestomatológica de implantes, vol. X, No. 4, pp. 224-228, ISSN: 1133-1615.
Aparicio, C.; Gil, J.; Peña, F.; Planell, J., (2002), "Mejora del comportamiento a fatiga de implantes dentales de titanio tratados mediante proyección de partículas abrasivas", Anales de mecánica de la fractura, pp. 525-530, ISSN: 0213-3725.
Gil, J.; Aparicio, C.; Planell, J., (2002), "Effect of oxygen content on grain growth kinetic of Titanium", Journal of materials synthesis and processing, vol. 10, pp. 263-266, ISSN: 1064-7562.
Gil, J.; Aparicio, C., (2002), "Endurecimiento superficial del titanio para la mejora de la resistencia al desgaste en prótesis ortopédicas y dentales (Parte 1)", Tratamientos térmicos, vol. 70, pp. 27-30, ISSN: 1132-0346.
Gil, J.; Aparicio, C.; Nussbaum, G., (2002), "Endurecimiento superficial de titanio para la mejora de la resistencia al desgaste en prótesis ortopédicas y dentales: Parte II. Anodización química y difusión térmica.", Superficies, vol. 10, pp. 44-48, ISSN: 1575-8400.
Gil, J.; Aparicio, C.; Nussbaum, G., (2002), "Endurecimiento superficial de titanio para la mejora de la resistencia al desgaste en prótesis ortopédicas y dentales. Parte I", Superficies, vol. 10, pp. 40-43, ISSN: 1575-8400.
Aparicio, C.; Gil, J.; Peña, F.; Planell, J., (2002), "Mejora del comportamiento a fatiga y de la osteintegración de implantes dentales de titanio arenados", Anales de mecánica de la fractura, vol. 19, pp. 525-529, ISSN: 0213-3725.
Gil, J.; Padrós, A.; Manero, J.; Aparicio, C.; Nilsson, M.; Planell, J., (2002), "Growth of bioactive surfaces on titanium and its alloys for orthopaedic and dental implants", Materials science and engineering C. Biomimetic and supramolecular systems, vol. 22, No. 1, pp. 53-60, ISSN: 0928-4931.
Morejón, L.; Mendizábal, E.; Delgado, J.; Ginebra, MP.; Aparicio, C.; Gil, J.; Marsal, M.; Davidenko, N.; Planell, J., (2001), "Tenacidad a la fractura de cementos óseos modificados con hidroxipatoita", Ingeniería química (México), No. 9, pp. 67-72, ISSN: 0020-1081.
Padrós, A.; Peraire, C.; Aparicio, C.; Gil, J.; Calvo, M.; Sada, E., (2000), "Valoración de la adherencia de células humanas de tipo osteoblástico sobre diferentes tipos de arenados y pasivados en superficies de titanio", Revista odontoestomatológica de implantes, pp. 301-304, ISSN: 1133-1615.
Gil, J.; Aparicio, C.; Planell, J., (2000), "Mejora del comportamiento a fatiga oligocíclica de titanio comercialmente puro, mediante tratamientos superficiales de chorreado por inyección de partículas abrasivas", Superficies, vol. 3, pp. 59-63, ISSN: 1575-8400.
Aparicio, C.; Rodríguez, D.; Gil, J.; Fonseca, C.; Barcosa, M.; Planell, J., (1999), "Comportamiento a la corrosión de los implantes de titanio granallados", Biomecánica, pp. 21-26, ISSN: 1135-2205.
Padrós, A.; Peraire, C.; Aparicio, C.; Gil, J.; Calvo, M., (1999), "Valoración de la adherencia de células humanas de tipo osteoblástico sobre diferentes tipos de arenados y pasivados en superficies de titanio", Revista odontoestomatológica de implantes, vol. VII, No. 4, pp. 145-152, ISSN: 1133-1615.
Ginebra, MP.; Aparicio, C.; Albuixcech, L.; Fernández-Barragán, E.; Gil, J.; Planell, J.; Morejón, L.; Vázquez, B.; Sanromán, J., (1999), "Improvement of the mechanical properties of acrylic bone cements by substitution of the radiopaque agent", Journal of materials science. Materials in medicine, vol. 10, pp. 733-737, ISSN: 0957-4530.
Aparicio, C.; D.Rodriguez; Gil, J.; Fonseca, C.; Barbosa, M.; Nussbaum, G.; García, A.; Planell, J., (1999), "Comportamiento a la corrosión de implantes de titanio granallados", Biomecánica, vol. VII, pp. 2-11, ISSN: 1885-9518.
Aparicio, C.; Gil, J.; Padrós, A.; Peraire, C.; Planell, J., (1999), "Aplicación del shot peening en implantes dentales de titanio para la mejora de la osteointegración", Revista de Metalurgia, pp. 184-189, ISSN: 0034-8570.
Aparicio, C.; Gil, J.; García-Alcocer, A.; Naussbaum, G.; Padrós, A.; Peraire, C.; Planell, J., (1998), "Aplicación del shot peening para la mejora de la osteointegración en implantes dentales de titanio: influencia de las partículas de proyección (II parte)", Fundidores (Madrid), vol. 57, pp. 29-32, ISSN: 1132-0362.
Aparicio, C.; Gil, J.; Padrós, A.; Peraire, C.; Planell, J., (1998), "Aplicación del Shot-peening en implantes dentales de titanio para la mejora de la oseointegración", Revista de Metalurgia, vol. 34, pp. 184-189, ISSN: 0034-8570.
Aparicio, C., (1998), "Influencia de la naturaleza y tamaño de las partículas de shot-peening, sobre la rugosidad y la composición superficial de los implantes dentales", Boletín informativo de Implantología, vol. 6.
Gil, J.; Planell, J.; Aparicio, C., (1997), "Influencia de la naturaleza de las partículas de proyección en el proceso Shoot peening en la mejora de la osteointegración de implantes dentales", Biomecánica, pp. 92-100, ISSN: 1135-2205.
Aparicio, C.; Gil, J.; García-Alcocer, A.; Nussbaum, G.; Padrós, A.; Peraire, C.; Planell, J., (1997), "Aplicación del shot peening para la mejora de la osteointegración en implantes dentales de titanio: influencia de las partículas de proyección (I parte)", Fundidores (Madrid), vol. 56, pp. 35-38, ISSN: 1132-0362.
Aparicio, C.; Gil, J.; Padrós, A.; Peraire, C.; Planell, J., (1997), "Influencia de la naturaleza de las partículas de proyección en el proceso Shoot peening en la mejora de la osteointegración de implantes dentales", Revista de biomecánica, vol. V, No. 9, pp. 92-100, ISSN: 1575-5622.

Book chapters

Giner Tarrida, L; Mallor, I.; Fisher, N.; Aparicio, C., (2023), "Cap. 2: Biomoléculas antimicrobianas como elementos para la prevención de infecciones asociadas a materiales avanzados", AIOI Mundial: Odontología por expertos vol. 2, pp. 25-38, Ediciones de la Universidad Nacional de Rosario. ISBN: 978-987-702-646-7.
Mutreja, I.; Ye, Z.; Aparicio, C., (2020), "Cellular Responses to Titanium and Titanium Alloys", Handbook of Biomaterials Biocompatibility, pp. 423-452, Woodhead Publishing Limited. ISBN: 9780081029671.
Fisher, N.; Aparicio, C., (2020), "Methods of Testing Cell Proliferation on Biomaterial's Surface", Handbook of Biomaterials Biocompatibility, pp. 175-194, Woodhead Publishing Limited. ISBN: 9780081029671.
Macías, J.; Bins-Ely, L.; Sordi, M.; de Souza Magini, R.; Aparicio, C.; Shokunfar, T.; Cooper, L., (2018), "Chapter 2: Nanostructured surfaces of craniomaxilofacial and dental implants", Nanostructured Biomaterials for Cranio-Maxillofacial and Oral Applications, pp. 28, Elsevier Science Publishing Company Inc. ISBN: 9780128146217.
Chen, X.; Li, Y.; Aparicio, C., (2013), "Biofunctional Coatings for Dental Implants", Thin Films and Coatings in Biology. (Biological and Medical Physics - Biomedical Engineering Series), pp. 105-143, Springer-Varlag. ISBN: 978-94-007-2592-8.
Carles Mas-Moruno; Espanol, M.; Montufar, EB.; Mestres, G.; Aparicio, C.; Gil, J.; Ginebra, MP., (2013), "Bioactive metallic and ceramic surfaces for bone engineering", Biomaterials Surface Science, pp. 337-374, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim. ISBN: 978-35-273-3031-7.
Aparicio, C.; Maazouz, Y.; Yang, D., (2012), "Measuring wettability of biosurfaces at the microscale", Nanotechnology in Regenerative Medicine: Methods and Protocols. Methods in Molecular Biology, pp. 163-177, Springer-Verlag. ISBN: 978-1-61779-387-5.
Altankov, G.; Groth, T.; Engel, E.; Gustavsson, J.; Pegueroles, M.; Aparicio, C.; Gil, J.; Ginebra, MP.; Planell, J., (2010), "Development of Provisional Extracellular Matrix on Biomaterials Interface: Lessons from In Vitro Cell Culture", Advances in Regenerative Medicine: Role of Nanotechnology, and Engineering Principles, pp. 19-45, Springer-Verlag. ISBN: 978-90-4818789- 8.
Planell, J.; Navarro, M.; Altankov, G.; Aparicio, C.; Engel, E.; Gil, J.; Ginebra, MP.; Lacroix, D., (2010), "Materials Surface Effects on Biological Interactions", Advances in Regenerative Medicine: Role of Nanotechnology, and Engineering Principles, pp. 233-252, Springer-Verlag. ISBN: 978-90-4818789- 8.
Planell, J.; Aparicio, C., (2008), "Biomateriales. Evolución y desarrollo de materials para la sustitución, reparación y regeneración de tejidos y órganos", Nuevos materiales, nueva industria, pp. 309-324, Ministerio de Industria, Turismo y Comercio. ISBN: 978-84-612- 1744-1.
Gil, J.; Aparicio, C.; Peña, F., (01/2005), "Relación estructura-propiedades en Ciencia de los Materiales: Proceso de envejecimiento del duraluminio", Didàctica i organització d'assignatures basades en l'experimentació, pp. 223-227. ISBN: 84-689-0565-8.
Fernandez, E.; Gil, J.; Aparicio, C.; Nilsson, M.; Sarda, S.; Rodriguez, D.; Ginebra, MP.; Manero, J.; Navarro, M.; Casals, J.; Planell, J., (2003), "Materials in dental implantology", Dental biomechanics, pp. 69-89, CRC Press, Taylor & Francis Group. ISBN: 0-41-5306663.
Ontañón, M.; Aparicio, C.; Ginebra, MP.; Planell, J., (2000), "Structure and Mechanical Properties of Bone", Structural Biological Materials, pp. 31-72, Pergamon-Elsevier. ISBN: 0-08-0434169.

Projects and research

SCOI - Study and Control of Oral Infections17/01/2023 - 17/01/2026
IP: Aparicio, C.
Agencia de Gestió d'ajudas Universitaries Investigació AGAUR
2021 SGR 00626 - SCOI - Study and Control of Oral Infections (Odontopediatria)01/01/2022 - 31/12/2024
IP: Aparicio, C.
Universitat Internacional de Catalunya
Bioinspired Acellular Strategies to Optimize the Skin-Implant Interface of OI Devices01/01/2020 - 31/12/2023
IP: Aparicio, C.
U.S. Army Medical Research Acquisition Activity
Probabilistic multifactorial lifetime assessment for resin- based composite restorations01/01/2019 - 31/12/2022
IP: Fok, A.
National Institutes of Health of the U.S. Department of Health and Human Services
Minnesota Craniofacial Research Training Program01/01/2017 - 31/12/2022
IP: Mansky, K.
National Institute of Dental and Craniofacial Research, National Institute of Health
Optimizing Skin- Implant Interface of Osseointegrated Devices01/01/2017 - 31/12/2022
IP: Bechtold, J.
Department of Defense, Naval Medical Research Center
Precision engineered, functional oligonucleotide-eluting mucoadhesive nanoscale films for the management of oral candidiasis01/01/2021 - 30/06/2022
IP: Velekantan, P.
International Association for Dental Research
A novel peptide enhanced class-V dental restorative system with a 3-tier fortification01/01/2017 - 31/12/2021
IP: Aparicio, C.
National Institute of Dental and Craniofacial Research, National Institute of Health
Easy wearable devices based on cationic biopolymer membranes for point-of-care collecting/ self-sampling high loads of viral particles01/01/2020 - 31/12/2020
IP: Aparicio, C.
Office of Discovery and Translation; Clinical and Translational Science Institute
Novel Polymer Matrix for Dental Applications-Phase II01/01/2018 - 31/12/2020
IP: Fok, A.
National Institutes of Health of the U.S. Department of Health and Human Services

Industrial Member of the MDRCBB - 3M 202101/01/2021 - 31/12/2026
IP: Fok, A.
3M Foundation
Antimicrobial Characterization of poly-amino acid ALD14/02/2022 - 30/09/2022
IP: Aparicio, C.; Delgado, LM
Arradiance LLC
Industrial Member of the MDRCBB - Mozo Grau Dental Implants -201901/01/2019 - 31/12/2021
IP: Aparicio, C.
Mozo Grau
Stem Cell / Scaffold applications in Musculoskeletal Translation01/01/2019 - 31/12/2021
IP: Aparicio, C.; Bechtold, J.
Institute for Engineering in Medicine, University of Minnesota
Industrial Member of the MDRCBB - 3M 201601/01/2016 - 31/12/2020
IP: Fok, A.
3M Foundation
Assessment of in vitro antimicrobial properties and cell osteogenic properties of titanium surfaces treated with proprietary N2- Biomedical surface treatment01/01/2019 - 31/12/2019
IP: Aparicio, C.
N2 Biomedical
Assessment of static corrosion of orthodontic bands01/01/2019 - 01/01/2019
IP: Aparicio, C.
Ormco
Industrial Member of the MDRCBB - Mozo Grau Dental Implants 201601/01/2016 - 31/12/2018
IP: Aparicio, C.
Mozo Grau
Industrial Member of the MDRCBB - Ormco 201501/01/2015 - 31/12/2017
IP: Aparicio, C.
Ormco
Infection Prevention in Total Knee Replacement (Subcontract)01/01/2015 - 31/12/2017
IP: Aparicio, C.
National Institute of Allergy and Infectious Diseases (NIAID) of the National Institutes of Health

Activities

Symposium on Biomaterials and Related Areas Ponència convidada "Bioinspired solutions at surfaces and interfaces to prevent transepithelial implant infections (Plenary Lecture)", 2023.
ORS Annual Meeting (Orthopaedic Research Societies) Presentació de comunicació "Bioactive anti-infective photocurable hydrogel for improved durability of the skin/implant interface.", 2023.
ORS Annual Meeting (Orthopaedic Research Societies) Presentació de comunicació "Basement Membrane-derived Peptide Nanocoatings Promote Peri-Implant Epithelium-like Keratinocyte Function.", 2023.
AADOCR/CADR Annual Meeting & Exhibition (American Association for Dental, Oral and Craniofacial Research) Presentació de comunicació "IL-23R Antagonist Nanocoatings Polarize Macrophages For Implant Soft Tissue Healing.", 2023.
Bioinspired Materials Gordon Research Conference Presentació de comunicació "Basement membrane-derived peptides nanocoatings to promote percutaneous devices soft tissue attachment and prevent infection.", 2022.
Co-chair of Session in 2021 Annual Conference of the European Society for Biomaterials President, 2021.
Member International Advisory Board - 2021 Annual Meeting of the European Society for Biomaterials Vocal, 2021.
Reviewer for 2020 Annual Meeting of the American Association for Dental Research Vocal, 2020.
Reviewer for 2020 Annual Meeting of the International Association for Dental Research Vocal, 2020.
Chair of Session in 2020 Annual Meeting of the International Association for Dental Research President, 2020.

Faculties & institutes

Clinics

Teaching team

Alumni

Find out more

Intranet

Password

Faculties, institutes and directory

Faculties & institutes

Clinics

Teaching team

Alumni

Intranet

Password

Admissions

Directory

APARICIO BADENAS, Conrado José

APARICIO BADENAS, Conrado José

CV

Education

Publications

Projects and research

Activities

Get to know us

Studies

Community

Press