From the University to the world
Universitat Internacional de Catalunya
Prosthodontics 3
Prosthodontics 3
6
10007
4
First semester
OB
Main language of instruction: Spanish
Other languages of instruction: Catalan, English
Other languages of instruction: Catalan, English
Teaching staff
Wednesday at 15 pm with appointment (cabratosa@uic.es
Introduction
- The dental prosthesis that is made use of osseointegrated implants for dental restoration of absences and their functions, is a type of prosthesis usual today. That is why it is essential to know its characteristics, indications, contraindications, designs, limitations, maintenance and potential problems associated with them.
Pre-course requirements
- Having passed the subject Prosthodontics 1 and 2
Objectives
- Educate and capacity students in diagnosis and treatment through prosthetic implantology.
Competences/Learning outcomes of the degree programme
- 65 - Diagnosing, planning and undertaking, at a general level, multidisciplinary, sequential and integrated treatment of limited complexity for patients of all ages and conditions and patients with special needs (diabetes, hypertension, oncological diseases, transplants, immune-depression, anti-clotting, etc.) or disabilities. Specifically the dentist should be competent in establishing a diagnosis, a prognosis and developing a suitable treatment plan, particularly in terms of orofacial pain, temporo-mandibular disorders, bruxism and other parafunctions; dental and periapical pathology; oral and dental trauma; periodontal and peri-implanted tissue pathologies; pathology of the mandibular bone, of soft oral tissue and annex glands; states of partial or total edentation and planning rehabilitation treatment via dento-muco supported prostheses, or dental impants, dental malpositions or malocculusions and other anatomical or functional alterations of the face or the stomatognathic system and their potential orthodontic, orthopaedic or surgical corrections
- 68 - Determining and identifying the aesthetic requirements of patients and the possibility of resolving their concerns
- 70 - Evaluating motor and sensory oral, mandibular and annex function
- 82 - Designing, preparing teeth, prescribing, recording, doing clinical tests, fitting and putting indirect restorations into service: incrustations, veneers or aesthetic laminate veneers and unitary crowns
- 85 - Undertaking conventional aesthetic procedures from a multidisciplinary perspective
- 86 - To treat both partial and full edentulism, including the biological design (specific design characteristics), dental preparation, obtaining record, clinical trials and adapting partial and full removable prostheses to patients, simple dental-supported bridges and simple prostheses on top of implants, both removable and fixed, including
- 87 - To write up prescriptions to measure for healthcare products such as «dental prostheses» and «orthodontic and dento-facial orthopaedic apparatus»
Learning outcomes of the subject
- 4.121 - Know how to make a correct analysis of study models
- 4.122 - Know how to make a correct analysis of the plaster models
- 4.126 - Know how to make a list of diagnostic problems and structure it properly
- 4.133 - Acquire the discipline to focus interdisciplinary treatments
- 4.134 - Know the characteristics of each type of dental prostheses (complete prostheses, removable partial dentures, overdentures teeth fixed prosthesis, joint prosthesis, maxillofacial prosthesis, prosthetic and implant, prostheses sealing); as well as different designs of each one, the nomenclature of the elements that constitute it and the objectives to be achieved with their implementation.
- 4.135 - Know the indications and contraindications of each type of dental prosthesis
- 4.136 - - Assess the patient candidate for a dental prosthesis by performing a medical history, a study of models and complementary explorations that correspond in each specific case; and from this information identify the patient's aesthetic and functional demands and establish a diagnosis, prognosis and develop a treatment plan
- 4.137 - Identify patients requiring a multidisciplinary treatment to achieve therapeutic goals, and be able to work on the treatment.
- 4.138 - Determine the different biological parameters necessaries to perform an oral rehabilitation
- 4.140 - Apply the biomechanical concepts that govern each type of dental prosthesis.
- 4.141 - Get the right occlusive fit for each patient and each type of dental prosthesis.
- 4.145 - Determine in the edentulous patient or partially edentulous, the biological parameters that characterize artificial teeth and locate the in the space. In the case of complete and partial denture, will also be able to determine the parameters that characterize the base of the prosthesis.
- 4.153 - Take appropriate impressions for each of the types of dental prostheses; functional in removable partial prosthesis, in closed and open bucket, in implant prosthesis, and the associated techniques.
- 4.155 - Carry out various prosthesis tests and color that are made during the preparation of the different prostheses.
- 4.156 - Know the different materials used to make dental prosthesis and be able to indicate the most appropriate for each case.
- 4.157 - Inform the patient on the most appropriate maintenance measures for each type of dental prosthesis.
- 4.158 - Carry out the appropriate controls for each type of prosthesis in order to detect and prevent the most frequent complications.
- 4.160 - Perform the appropriate requirements in the dental laboratory for each type of prosthesis.
Syllabus
Master classes
Topic 1. Introduction to implant prostheses and types of prostheses.
Topic 2. Diagnosis and patient selection in implant prostheses.
Topic 3. Implant-prosthesis connections.
Topic 4: (4.1/4.2) Single prostheses and attachments.
Topic 5. Protocol for single unit prostheses.
Topic 6. Fixed partial prosthesis.
Topic 7. Complete fixed prosthesis.
Topic 8: (8.1/8.2) Diagnostic waxing and digital study.
Topic 9: (9.1/9.2) Impression techniques on implants (analogue).
Topic 10. Digital impression techniques.
Topic 11. Removable prostheses on implants. Overdentures.
Topic 12: (12.1/12.2) Immediate loading in implant prostheses.
Topic 13. Occlusion in implant-supported prostheses and passive adjustment.
Topic 14. CAM fabrication of implant-supported prostheses.
Topic 15: (15.1/15.2) Digital Implantology.
Maintenance of implant-supported prostheses.
Topic 17. Complications of implant prostheses.
Topic 18. (18.1/18.2) Clinical cases.
Topic 19: (19.1/19.2 Review of contents.
Teaching and learning activities
In blended
Master classes, seminars and integrated clinical practices, face-to-face and online.
Evaluation systems and criteria
In blended
1)- EVALUATION OF THEORY
- PARTIAL EXAM
Multiple-choice test type face-to-face partial exam of 25 questions with 4 answers, with only one correct answer. Each correct answer will add 0.4 points, incorrect answer will subtract 0.132 points and no answer will deduct any points.
It is rated on a scale of 0 to 10.
This exam will not have a second call.
If you cannot attend the exam and the absence is duly justified, this exam will not be counted in the final grade. To base the theoretical assessment of the final grade, only on the final exam.
If you cannot attend the exam and the absence is not duly justified, this exam will be counted in the final grade with a grade of 0.
- FINAL EXAM
Final exam type face-to-face test of 50 questions with 4 answers, with only one correct answer. Each correct answer will add 0.2 points, incorrect answer will subtract 0.066 points and no answer will count.
It is rated on a scale of 0 to 10.
2)-ASSESSMENT OF CLINICAL PRACTICES:
According to the criteria indicated by the Integrated Area (CUO).
The FINAL GRADE will be in accordance with the following percentages:
NOTE THEORETICAL ASSESSMENT: 60%
PRACTICE EVALUATION GRADE: 40%
The THEORETICAL ASSESSMENT NOTE will correspond to:
- Partial theoretical exam that will count for 25%
- Final theoretical exam that will count for 75%
PRACTICE EVALUATION NOTE:
- It will correspond to the practical note
To pass the subject you must have passed the theoretical and practical assessment separately. Once passed individually, the mentioned percentages will be applied.
Bibliography and resources
Cantó-Naves O, Medina-Gálvez R, Samet N. Dando sentido a laPrótesis Implantológica. Barcelona. Quintesence books, 2019.
Misch CE. Prótesis dental sobre implantes. Madrid: Elseiver Mosby; 2005.
Davarpanah M, Martínez H, Kebir M, Tecucianu JF.Clinical Manual of Implant Dentistry.London. Quintesence books, 2003.
Davarpanah M, Szmukler-Moncler S. Immediate loading of dental implants. Theory and clinical practice. Paris. Quintesence books, 2008.
Evaluation period
E: exam date | R: revision date | 1: first session | 2: second session:
- E1 20/01/2027 A03 10:15h
- E1 20/01/2027 A01 10:15h
- E1 20/01/2027 A04 10:15h
- E1 20/01/2027 A22 10:15h